Progressive Automotive, Clutch & Brake parts, brake pedals, booster, master cylinder, rear disc brakes, brake fittings

Progressive Automotive, brake pedal, brake system, Wilwood, SSBC, Stainless steel brake, brake fittings, brake lines, booster, power booster, master cylinder, power brakes suspensions, Corvette suspensions, Street Rods, Street Rod, hi-boy, ford truck, Ford, coupe, Sedan, truck, panel, roadster, cabriolet, bodies, IFS, IRS, 9-inch,

Brake Pedals & Parts

Back to the Progressive Automotive Main Page

Call (740) 862-4696 for your needs!

Brake Pedal Assemblies

These brake pedals are designed for our tubular X-members. Booster/Master cylinder mounts feature a dual bolt pattern for either power or manual brake hook-up. Our unique split design allows the booster/master cylinder mount to be moved back when only a tubular transmission mount is used.

Model A, 1932 Ford, 1932-33 (1st Ser.) Ford truck. PA-BPT-A...............$199.00

1942-56 Ford truck/1955 (2nd Ser.) -59 Chevy truck. Included booster clearance box, PA-BPT-T...............$229.00

All Others.............................PA-BPT...............$199.00

PA-BPT with PA-PB

Hydraulic Clutch/Brake Pedal Assemblies

These Clutch/Brake pedals are designed for our tubular X-members. Our unique split design allows the booster/master cylinder mount to be moved back when only a tubular transmission mount is used.

Model A, 1932 Ford, 1932-33 (1st Ser.) Ford truck. PA-BPT-AC...............$379.00

1942-56 Ford truck/1955 (2nd Ser.) -59 Chevy truck. Included booster clearance box, PA-BPT-TC...............$415.00

All Others.............................PA-BPT-C...............$379.00

Hydraulic Clutch cylinder, 90 Corvette style, remanufactured.....................PA-HC...............$149.00

PA-BPT-C shown with PA-PB, PA-HC and PA-RES1

BOOSTERS, MASTER CYLINDERS, HYDRAULIC CLUTCH CYLINDERS & REMOTE RESERVOIRS

Our new power brake boosters and rebuilt master cylinders can be used on drum/drum, disc/drum and disc/disc combinations. The booster is compact for tight clearances and the master cylinder has equal sized chambers. It also has the safety of dual chambers!

7" Booster & Master cylinder.....................PA-PB7...............$185.00

7" Chrome booster & billet Master cylinder (specify cap style).....PA-PB7-PC.....$567.00

7" Dual Diaphragm Booster & Master cylinder.....................PA-PB7-D...............$220.00

7" Chrome Dual Diaphragm booster & billet Master cylinder (specify cap style).....PA-PB7-DPC.....$567.00

9" Booster & Master cylinder for 1955-57 and 61-64 Chevy car....................PA-CJ-PB...............$267.00

9" Chrome booster & billet Master cylinder (specify cap style) for 1955-57 and 61-64 Chevy car.....PA-PB-PC.....$567.00

Billet Master cylinder with Smooth cap

Billet Master cylinder with Finned and Flamed cap shown

Our manual brake master cylinder has all the same features as our power brake master cylinder.

Manual Master cylinder.....................PA-MC...............$65.00

Billet Manual Master cylinder, Specify cap style.....................PA-MC-PC...............$379.00

PA-RES1

Finally, a remote reservoir kit that's easy to check brake fluid with and looks the way it should! Designed for dual reservoir master cylinders and comes complete with the needed hardware, fittings and parts! Billet reservoir and firewall mount has all of the fittings and mounts in the inside of the firewall, and hidden from view to retain that smooth firewall. Billet cap for the reservoir also has a built-in bleeder to make installation and brake bleeding a snap! Residual valves aren't needed because the fluid level in the reservoir, is designed to be mounted higher than the bleeder screws in the calipers or cylinder! It even eliminates over $100.00 in residual valves and stainless fittings required for the valves!

Remoter reservoir kit, RES-1....$199.00

Brake Line Kits

Get confused on what you need for your brakes? We are now offering brake line kits for what you need. Kits are available with steel fittings or stainless AN fittings. If your caliper combination isn't listed, call or email us with the caliper type and thread type.

From Left to Right, BHK-SRF and BHK-SRF-SS

Front Brake kit for G.M Metric calipers (10MM x 1.5 thread) with 18" DOT. approved braided hoses

Steel kit for SAE 45 degree double flares, BHK-SRF....$110.00

Stainless kit for AN 37 degree single flares, BHK-SRF-SS....$255.00

Front Brake kit for C4 Corvette calipers (10MM x 1.75 thread) with 18" DOT. approved braided hoses

Steel kit for SAE 45 degree double flares, BHK-SWF....$119.00

Stainless kit for AN 37 degree single flares, BHK-SWF-SS....$275.00

BHK-9DR shown

Rear Brake kit for 9" Ford rear drum brakes (3/8" x 24 thread) with 16" DOT. approved braided hoses

Steel kit for SAE 45 degree double flares, BHK-9DR....$95.00

Stainless kit for AN 37 degree single flares, BHK-9DR-SS....$120.00

BHK-9DB shown

Rear Brake kit for 9" Ford rear with rear disc brakes (10MM x 1.5 thread) with 16" DOT. approved braided hoses

Steel kit for SAE 45 degree double flares, BHK-9DB....$110.00

Stainless kit for AN 37 degree single flares, BHK-9DB-SS....$125.00

Rear Brake kit for C4 Corvette rear for factory C4 calipers (10MM x 1.75 thread) with 16" DOT. approved braided hoses

Steel kit for SAE 45 degree double flares, BHK-SWR....$135.00

Stainless kit for AN 37 degree single flares, BHK-SWR-SS....$145.00

BHK-HLK shown

3/16" Hardline kit with fittings, (1) 20' and (1) 10' hard line, stainless line clamps and proportioning valve

Steel line kit with brass t's and steel inverted flare nuts for SAE 45 degree double flares, BHK-HLK....$75.00

*Stainless line kit with fittings for AN 37 degree single flares, BHK-HLK-SS....$220.00

RES-RV RES-RV-SS

Residual valve kits (when not using our RES-1)

Steel kit with (2) valves and steel fittings for SAE 45 degree double flares, Specify Disc/Disc or Disc/Drum, RES-RV....$25.00

Stainless kit with (2) valves and fittings for AN 37 degree single flares, Specify Disc/Disc or Disc/Drum, RES-RV-SS....$71.00